点击图片查看大图1.两个11-bit DAC
2.标准:采样率8gsp时4GHz外部时钟
3.可选:8 gsp时4 GHz生物钟与10 MHz或预先选择10 ~ 100 参考时钟的
4.可选:采样率的范围从4到8 gsp时(2到4 GHz时钟)
5.多种波形运行模式包括自由运行,免费的运行和触发破裂触发模式
6.记忆深度8米多页面配置
7.动态分页-无缝波形交换
8.高速硬件触发和API软件触发
9.可编程循环波形重复
10.三个可编程信号标志
11.各种内置波形,包括脉搏、多频和FMCW线性啁啾
12.USB 2.0兼容的接口(其他接口要求)
13.48 W功率消耗
14.包括12 v AC适配器
15.铝外壳尺寸:8.25 x 3.5 x 14(W x H x L)英寸
16.同伴API和软件驱动程序,便于系统开发
17.兼容Matlab(2010或更高版本)和虚拟仪器
The AWG872 modules generate dual channel arbitrary CW waveforms with sampling rates up to 8 GSPS. The on-board SRAMs provide 8M x 11-bit data memory. The AWG872 can be controlled by a PC via a USB interface or can work alone with pre-stored waveforms. The sole RF input is a single-ended clock source CK, which can be operated at 4 GHz with minimum power of 12 dBm. With the double-sampling rate DAC, the input clock needs to be only half of the analog sampling rate. The RF outputs of the module are comprised of a pair of differential analog outputs, OP and ON, with 50-W back termination. The module accepts a high-speed trigger signal and generates synchronization outputs and three programmable marker signals. The waveform generation can be in continuous or burst/pulse mode. The waveform contents can be dynamically changed using user page selection. A programmable profile option offers further programmatic controls of user pages, loop repetitions and auto trigger periods. The companion API provides an interface for software development